|
|
AS-PE Pressure Elements
SummaryFCI provides pressure elements mounted in protective
metal bodies for direct installation into pipes, ducting, tanks,
reservoirs, sumps and gearboxes on commercial and military aircraft,
spacecraft, vehicles and marine applications. These sensors are
available as single point elements that connect to FCI or customer
provided electronics to indicate the absolute, gauge or differential
pressure at the sensing point(s).
FCI’s highly reliable detection of pressure in the harshest
aerospace and military applications is accomplished with a no moving
part piezoresisitive sensor element and reported Mean Time Between
Failure (MTBF) in excess of 100,000+ hours.
Please complete and submit the attached Application Data Sheet or
contact FCI’s Field Representative in your area to receive a
technical quotation for your Pressure Element application.
Applications
|
|
 |
Air ducts |
|
Lubricating
gearbox oil |
| |
Hydraulic gearbox oil |
|
Potable and
gray water |
| |
Coolant and
heating fluids |
|
Other fluids
and gases |
Specifications
Service: Liquid and gas pressure.
Accuracy: ± 1% of reading.
Repeatability: ± 0.1% of reading.
Time Response: As low as 0.5 seconds.
Reliability (MTBF): 100,000+ hours.
Qualifications: MIL-STD-130 - Marking, MIL-STD-810 -
Environmental Testing, MIL-STD-461/462 - EMI.
Quality System Approvals: ISO9001 and AS9000.
Electrical Connection: Military, commercial connector or
pigtail cable.
Weight: 0.2 lbs to 0.7 lbs [0.09 to 0.31 kgs].
Materials of Construction:
Standard: All welded 300 series stainless steel.
Optional: Aluminum, titanium or other alloys available
with hermetically sealed connectors.
Process Connection: Flanged or threaded per AS930, AS4395,
MS33656.
Temperature Ranges:
Operating: -40° to +257° F [-40° to +125° C]
Survival: -112° to 392° F [-80° to +200° C]
Pressure Ranges:
Operating: Up to 10,000 psig [690 bar(g)]
Proof: Up to 20,000 psig [1380 bar(g)]
Burst: Up to 40,000 psig [2760 bar(g)]
Optional N.I.S.T. Test Lab Calibration Services
Factory N.I.S.T. calibration is available as an option for customer
specified setpoint(s). |
