|
| |
OEM Flow Switches |
|
 |
Download literature
for this product |
 |
OEM Flow Switches
Summary
These products feature 300 series stainless steel rugged
industrial design with no moving parts and
negligible pressure drop. Optional materials of construction
include CPVC with Hastelloy C-22 tips for
corrosive applications.
OEM flow switches are used in liquids, gases and slurries.
They are ideally suited for low flow pump
protection, monitoring lube oil, detecting seal leakage,
verifying analyzer flow, monitoring cooling water and many
other critical applications.
OEM Products
 |
2-Wire
Loop Powered
Ideal for applications with installation
constraints. Typical flow applications include lube
oil monitoring,
cooling water detection, air flow and/or leak
detection and analyzer sample flow verification.
The NuTec style flow switch uses a two-wire control
circuit in an explosion proof enclosure. Wetted
parts are 300 series stainless steel.
|
 |
Insertion
Type with Pigtail
Features a pigtail connection and remote 4-wire
control board that is ideal for small/ confined
vessels and difficult to access locations. Typical
flow applications include lube oil monitoring,
cooling water detection, air flow and/or leak
detection and analyzer sample flow verification.
Wetted parts are 300 series stainless steel. CPVC
with 300 series stainless steel or Hastelloy C-22
sensors are also available.
|
 |
Flow and
Temperature
Features flow monitoring with an additional output
parameter for temperature. The transmitter can be
configured to provide a solid state output with
changes in flow and temperature. Ideal for
semiconductor flow applications monitoring air flow
to cool their process by providing a signal when
there is significant deviation in the flow rate or
air temperature. Relay contacts are available.
Wetted parts are 300 series stainless steel.
|
 |
Mass Flow
with 2-Wire Loop Powered
Features a ¼ inch insertion sensor that is ideal for
applications monitoring flow to analyzers. The
2-wire loop powered small circuit board design
enables convenient mounting in customer's control
system enclosure. Wetted parts are 300 series
stainless steel.
|
 |
Integral
Type
Features the combination of small size, low cost and
no moving parts with 24 Vdc input power to provide
the perfect solution for chlorinated water and other
corrosive medias as well as other aqueous or
hydrocarbon fluids. Wetted parts are CPVC with
Hastelloy C-22 sensors. 316L stainless steel body,
pigtail or M12 connectors are also available.
|
 |
High
Temperature
Features pigtail connections from a small sensor to
remote electronics for applications with process
temperatures up to 450° F. Typical flow
applications include monitoring heating oil and
coolant fluids in wafer machines, plasma cutters,
welding machines and industrial lasers. Wetted
parts are 300 series stainless steel. |
|
|
