SpecificationsFor Level/Interface Service:
± 0.25 inch [± 6.4 mm]
± 0.125 inch [± 3.2 mm]
For Temperature Service:
± 2° F [±1° C]
± 1° F [± 0.6° C]
As low as 3 seconds.
Powder coated aluminum enclosure is rated for hazardous location use Groups B, C, D, E, F and G, CENELEC EEx d IIC and resists the effects of weather and corrosion per NEMA/CSA Type 4X (equivalent to IP66). Stainless steel is available as an option.
FM, CSA, CENELEC, ATEX with CE Mark.
Optional N.I.S.T. Flow Calibration Services
Factory N.I.S.T. calibration in air or water is available as an option for customer specified setpoint(s) or a flow curve based on the media ranges specified above
Materials of Construction:
All welded 316L stainless steel for all wetted surfaces.
0.75 inch male NPT
- 1.2 inch [30 mm]
- 2 inches [51 mm]
- 4 inches [102 mm]
-40° to +350° F [-40° to +177° C]
To 3500 psig [240 bar(g)]
-4° to +140° F [-20° to +60° C]
Field selectable 115 ± 15 Vac or 230 ± 30 Vac (50/60 Hz); 21 to 28 Vdc or 18 to 26 Vac; 7 watts maximum.
Field configurable dual SPDT or single DPDT rated 6 amps at 115 Vac, 240 Vac or 24 Vdc.
Analog DC voltage related to flow or level/interface signal and proportional to temperature.
1 inch female NPT